615 

קרא עוד


בקר מהירות לטיסנים של חברת העל CASTLE CREATIONS דגם PHOENIX EDGE 50A

 

מומלץ לוודא שיש זרימת אוויר טובה לקירור של הבקר,ישנו הסבר באנגלית בתחתית העמוד בצבע אדום.

 

 

נתונים טכניים:

-זרם קבוע: 100 אמפר

-מיועד ל 2-8 תאים של סוללות LIPO

-משקל: 127 גרם (ללא מחברים)

-מתח חוזר למקלט נע בין 5-8.4 וולט (ניתן לתכנת) בזרם של עד מקס 5 אמפר (למשך 0.5 שניות)

-מגיע ללא מחברים (קונקטורים)

 

Phoenix Edge 100 Specs
Applications
Helis:
500 Class, 550 Class, or 600 Class (use external BEC or RX/servo power source; not included)
Fixed wing:
.40 - .90
Technical Specs
Input voltage:
MIN: 2S LiPo MAX: 8S LiPo
Max continuous amperage at full throttle:
100 amps*
BEC voltage (voltage regulator for powering radio and sevos):
User selectable choice from 5 to 8.4 volt output
BEC output amperage:
5 amp peak**
Size and Weight
Width:
2.0" (50.8mm)
Length:
2.8" (71.9mm)
Height:
0.9" (23.2mm)
Weight w/wires:
4.5 oz (126.6g)
Weight w/o wires:
2.6 oz (72.9g)
Miscellaneous
Programmability:
Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software.
Castle Field Link Programming Card (sold separately) compatible for select functions.
Connectors:
Battery and motor connectors sold separately
Tools needed for installation:
Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.

 

*RC HOBBY APPLICATION RATING: 100 amps for the duration of a single 5,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.

 

**Peak indicates amperage sustainable for 0.5 seconds – long enough for most servos’ current draw transients. Your setup may vary. Always confirm servo current draw before the first flight of the model.